The High Temperature and Pressure (HTP) Conductivity Digital Smart Sensor allows for a simple and fully portable installation. The sensor may be calibrated anywhere (lab, shop or field) and interface with any data acquisition or control system in the field via the RS-485 MODBUS RTU output. Temperature and cell constant calibrations can be done with the sensor left in service if grab sample adjustments are desired to agree with reference values. Waterproof and corrosion-resistant NEMA 6P quick connect plugs come standard for a seamless hot-swap of sensors from service for cleaning, recalibration, and other maintenance requirements as well as eventual replacement in time.

Features

• Designed for inline installations at pressure up to 500 PSIG and temperature up to 205°C
• Designed for high pressure and high-temperature conductivity measurements
• DSS Technology with MODBUS RTU output Interfaces with any suitable PLC
• Sensor stores temperature and cell constant calibrations
• Compact design for ¾” NPT inline process interface
• Available in 1.0" and 2.25" insertion depth configurations
• Available cell constants of K=0.05/cm, K=0.1/cm, K=0.2/ cm, K=1.0/cm & K=2.0/cm
• Quick connect plugs for Plug and play connectivity
• The sealing option allows for use in areas with high levels of moisture, washdowns, rain or a corrosive environment

Applications

• High-pressure desalination and reverse osmosis (RO) reject concentrate monitoring and control
• Blowdown control, condensate monitoring and leak detection on heat exchangers and steam purity measurements
• Boiler condensate and blowdown control and/or monitoring in installation locations without coolers

Low range configuration

The High Temperature and Pressure Conductivity DSS sensor comes in a Low-Range configuration at pressure up to 500 psig and temperature up to 205°C

• Available cell constants of K=0.05/cm, K=0.1/cm, K=0.2/cm, K=1.0/cm and K=2.0/cm for lower conductivity ranges.
• Computed MegaOhms (MW) units using linear user-adjustable ATC coefficients or the non-linear ultrapure water ATC.
• Special configuration is available for K=0.1/cm cell constant for use in ultrapure water (UPW) applications. This version has the characteristic non-linear temperature compensation curve necessary for pure water measurement as well as providing the computed resistivity units of MegaOhms (MW) which are most commonly used for such applications.

Customise for your process
Our Ultra Tough smart sensors can be configured and customised for your application. See the product brochure for the available custom options. 

Smart Sensor Technology
Turtle Tough's latest Smart Sensor technology has revolutionized the way we manage and communicate with sensors.Utilizing onboard microprocessors and memory, our Smart technology has transformed how we connect, managemaintenance, monitor performance, and manage data compared to our analogue predecessors. To find more about the benefits of our Smart technology click here. 

Sensor Care and Maintenance
Turtle Tough smart sensors can be cleaned and calibrated offline to facilitate a hot-swapping maintenance regime. To know more about our sensor care and how to hot-swap maintenance regime go to turtletoughsensors.com/support/maintenance