Get tips and advice on the best way to install and connect your sensors, plus hardwiring instructions.
Learn how to care for, store, clean and maintain a Turtle Tough sensor.
Learn how to overcome common measurement problems.
Find instructions for hardwiring your Turtle Tough sensor to your analyser.
Turtle Tough's Drop Tube is an excellent alternative to in-tank immersion rods for applications that require submersion depths greater than 3 metres.
Click here to view a video of our innovative and clever installation methods
Drop Tube for in-tank submersion
Turtle Tough's Drop Tube is an excellent alternative to in-tank immersion rods for applications that require submersion depths greater than 3 metres. Turtle Tough Drop Tube allows a sensor to be “dropped” directly in a tank without attachments. Only sensors with back-end cable protection (CP option) should be used in this application to provide the required cable strength for retrieving the sensor from the tube. The guide tube holds the sensor in position at the desired depth (standard depth is 5m) and does not allow the sensor to drift aimlessly in the process at the risk of getting caught on agitators or internal tank components. This design saves lifting the immersion rod from the tank and allows shorter cable runs on the sensor. You can clean and calibrate by just pulling the sensor up from the tube. No winching of the immersion rod out of the tank is necessary, as the drop tube significantly improves the ease, safety and time spent on the cleaning and calibration of the sensor with the sensor at hand.
IMPORTANT: To ensure the compatibility of a sensor with your application, you should consider several elements. (sensor cable length, sensor configuration, waterproofing back-end type and length of PCV hose at the end of the sensor).
|Sensor name||Turtle Tough Drop Tube|
|Body type||316 Stainless Steel|
|Dimensions||65 mm OD with 62.6 mm ID pipe 5000 mm long and 65mm OD to 40 mm OD reducer at the end|
|Technical Drawing||Refer to the brochure|
|Recommended applications||In-tank submersion greater than 3 metres|
|Sensor/Interface||Turtle Tough sensors with back-end cable protection (CP) option.|
Extreme sensors call for extreme analysers and the Turtle Tough range has been designed with exactly that in mind. Whatever the application, we have a range of Smart analysers and control options to interface with your DSS sensors. Click to view our range...
We have a range of Smart Dgital Systemaccesories to interface, calibrate, communicate with your DSS sensors. Click to view our range...